Do Model 3 Highland Accessories Fit Model Y Juniper?
Short answer: No. A Model 3 Highland exterior accessory kit should not be assumed to fit a Model Y Juniper, even when both vehicles use HW4 cameras and the packages contain the same types of parts. Tesheer sells separate eight-piece kits because the fitted door-handle covers, side-camera housing covers, and mirror-trim strips follow vehicle-specific contours. Match the product to the car, model generation, and component shapes before removing any adhesive backing.
For a 2024–2026 Model 3 Highland, use the Tesheer Model 3 Highland Green 8-Piece Accessories Kit. Model Y Juniper owners should choose the separate Tesheer Model Y Juniper Green 8-Piece Kit.
Why similar eight-piece kits are not interchangeable
“Eight piece” describes the quantity, not a universal fit standard. Both Tesheer green kits repeat one glossy color across four handles, two side-camera housings, and two mirrors. The pieces still have to align with the exact surface underneath them. A small difference in length, curvature, edge angle, or mounting perimeter can leave a gap, create an overhang, or interfere with a moving part.
| Buyer check | Model 3 Highland kit | Model Y Juniper kit |
|---|---|---|
| Listed vehicle | Model 3 Highland | Model Y Juniper |
| Listed years | 2024–2026 | 2024–2026 on the product page; confirm the refreshed Juniper body and live shapes |
| Package layout | 4 handle covers, 2 HW4 camera-housing covers, 2 mirror strips | 4 handle covers, 2 HW4 camera-housing covers, 2 mirror strips |
| Material and finish | Glossy green molded ABS | Glossy green molded ABS |
| Cross-fit claim | Not listed for Model Y | Not listed for Model 3 |
The shared material, color, and part count can make the packages look interchangeable in a thumbnail. The critical difference is the vehicle-shaped underside and perimeter of each component.
Compare each component before you buy
Door-handle covers must follow the entire moving face
The four long pieces mount on the flush exterior handles. A correctly matched cover should stay within the handle face, follow both ends, and move only with the handle. It should not bridge the narrow gap between the handle and door skin. Highland and Juniper both use flush handles, but that similarity does not prove that their cover templates are identical.
Dry-fit a cover without exposing adhesive. Press the wide portion of the handle, pull the extended end, then allow it to return. If the cover outline reaches the surrounding panel or fails to sit flat, it is the wrong template.
HW4 describes hardware, not the outer housing shape
Both listings refer to HW4 side cameras, but “HW4” alone is not a cross-model fit guarantee. The accessory sits around the exterior camera housing, so its opening and molded perimeter must match that housing while leaving the lens fully exposed. A part can be intended for HW4 and still be shaped for only one vehicle body.
Tesla’s current Model 3 guidance says cameras must remain clean and free of obstructions. It also notes that a covered, dirty, or blinded camera can limit camera-based functions. After installing either kit, inspect the lens straight on and from several angles. Remove or realign any cover that intrudes into the opening.
Mirror strips depend on mirror-shell curvature
The two narrow green pieces trace the lower outside edge of the side mirrors. Their curve and taper are designed to meet a particular shell. A strip that looks close while held in the air can rock, lift at an end, or sit unevenly once pressed against a different mirror contour. Compare the live close-up photos rather than trimming or bending a mismatched rigid piece.
How to identify the correct green kit
- Confirm the vehicle name and generation. “Model 3” is not enough; the green sedan kit is for the 2024–2026 Highland. “Model Y” is not enough; the crossover kit is for the refreshed Juniper configuration shown in its listing.
- Open the exact product page. Check the title, URL, fit table, selected color, and current photos before ordering.
- Compare three separate shapes. Match the flush handles, side-camera housings, and mirror lower edges. Do not let one matching-looking component stand in for the other two.
- Review existing layers. Paint-protection film, a wrap, adhesive residue, or another cover can change the usable mounting surface.
- Dry-fit all eight pieces. Complete the fit check before exposing adhesive on any part. Stop if even one piece does not align cleanly.
At the time this guide was prepared, the Model 3 Highland product was active with 189 units across its color variants, including 34 Green units. The separate Model Y Juniper listing was also active, with 23 Green units among 190 total units. Inventory and price can change, so use the live pages for the final purchase decision.
What the Highland green kit includes
The featured Tesheer product is a coordinated exterior styling kit for 2024–2026 Model 3 Highland owners. It includes:
- Four glossy green molded ABS door-handle covers
- Two glossy green molded covers for the HW4 side-camera housings
- Two curved glossy green lower side-mirror trim strips
- Pre-applied adhesive for peel-and-stick mounting
Tesheer calls the color Green. In the live product photography it appears as a vivid yellow-green or lime-green accent. Lighting, camera exposure, and device displays can change how the shade appears, so it should be treated as a contrasting accent rather than an exact factory-paint match.
The kit is useful for a Highland owner who wants the same bright color repeated at three exterior locations instead of buying unrelated pieces separately. Buyers comparing another color can read the orange Model 3 Highland eight-piece guide or browse Tesheer’s Model 3 Highland exterior accessories.
Installation checks that protect normal operation
Work on a cool, dry vehicle in good light. Follow the instructions supplied with the kit and do not rush from the first successful piece to the remaining seven.
- Clean gently. Remove grit, wax, oil, and moisture from each mounting area using products appropriate for the original vehicle surface.
- Organize left and right pieces. Lay the kit on a clean surface and identify the position of every component.
- Dry-align first. Check all edges, camera openings, handle gaps, and mirror curves before exposing adhesive.
- Anchor one edge. Place the first reference edge lightly, confirm alignment, then lower the rest of the piece without forcing it.
- Press the perimeter. Apply controlled pressure across the full contact area, paying attention to curved ends.
- Function-test the car. Operate all four handles, fold and unfold both mirrors if equipped, and visually confirm that both camera lenses remain open.
For routine care, Tesla recommends rinsing away loose grime, hand washing with a clean soft cloth and mild car shampoo, rinsing with clean water, and drying thoroughly. Do not use abrasive objects or aggressive chemicals on exterior cameras or plastic trim. Consult Tesla’s official camera-obstruction guidance, door-handle instructions, and cleaning guidance.
Frequently asked questions
Do Model 3 Highland door-handle covers fit Model Y Juniper?
Do not assume they do. Tesheer lists separate vehicle-specific kits, and each cover must follow the complete handle face without touching the surrounding door panel.
Does HW4 mean the camera covers are universal?
No. HW4 identifies the camera hardware generation, but the accessory must also match the exterior housing and vehicle body. Use the kit listed for your exact vehicle.
Can I use only the handle covers from the eight-piece kit?
The package is sold as one coordinated eight-piece set. You can decide which accents to install, but first confirm that every part you use is from the correct vehicle-specific kit and does not interfere with normal operation.
Does the Highland kit fit a 2023 Model 3?
No. Tesheer lists the green kit for the 2024–2026 Model 3 Highland and excludes the pre-Highland 2017–2023 generation.
What if my car’s components look different from the photos?
Pause before ordering or applying adhesive. The actual handle, mirror, and camera-housing shapes are the final fit check; a model name or nominal hardware version should not override a visible mismatch.
Choose the kit built for the vehicle you own
Model 3 Highland and Model Y Juniper green accessory kits may share a color, material, and eight-piece format, but fitted exterior trim is not universal. Match all three component types, preserve handle movement and camera clearance, and use the separate listing for the correct vehicle. If you own a 2024–2026 Highland, review the Tesheer Green Model 3 Highland Kit and current availability.